| PEEK Natural | PEEK + ALP-NA1 20wt% | |
|---|---|---|
| MFR[g/10min] | 36 | 7 |
| Specific gravity | 1.30 | 1.41 |
| Flexural Stress[MPa] | 144 | 210 |
| Flexural modulus[GPa] | 3.4 | 9.6 |
| Thermal conductivity[W/mK] | 0.23 | 0.53 |
| Volume Resistivity[Ωcm] | 2.8E+16 | 2.2E+01 |
The pellets are made by adding 20% of ALMEDIO’s Carbon Nano Fiber for reinforcement (ALP-NA1) to PEEK.
The addition of 20% ALP-NA1 provides a flexural modulus of 9.6 GPa, about 2.3 times higher than that of the natural product.
The flexural stress is 1.5 times higher, the thermal conductivity is 2.3 times higher, and the volume resistivity can be greatly changed from an insulator to a conductor.
The fiber length of the CNF used is as short as 15um or less, so the surface of the molded product is smooth and recyclable and even if the product is re-molded, the properties will not be lost.
If higher thermal conductivity or flexural modulus is required, other grades of CNF could be added to achieve further performance.
■ Pellets 1kg~
■ If you are considering the following items or are interested, please contact us via email.
・High strength polyetheretherketone (PEEK)
・High modulus polyetheretherketone (PEEK)
・High thermal conductivity polyetheretherketone (PEEK)
・High electrical conductivity (low volume resistivity) polyetheretherketone (PEEK)
・Electromagnetic absorption, radio wave shielding polyetheretherketone (PEEK)
・High recyclability polyetheretherketone (PEEK)
・Low thermal expansion polyetheretherketone (PEEK)
・High sliding polyetheretherketone (PEEK)
・Low wear polyetheretherketone (PEEK)
Thermoplastic resins other than PEEK (PP, PE, PA, PBT, PPS, POM, etc.) are also welcomed to process compounding.